Mauser ML 8127
Automatic Stepping Motor Controlled
Single Needle Lockstitch Faltbed Sewing Machine

– Hardware optimization and upgrade, current shock resistance increased by 25%, failure rate reduced, electronic control performance more stable.
– 8 layers of denim, 1-layer of non-woven fabric, 2-layers of elastic knitted fabric, 2-layers of mesh gauze fabric, continuous sewing withou debugging, free to switch, beautiful stitch.
– Vibration : more than 2500rpm control at about 60μm low vibration, vibration peak from 480m down to 185μm, factory peak from 150m down to 50m.
– The assembly process is optimized, through the lower shaft position, the octagon grinding heads are parallel, the grinding process is optimized, the noise level is less than 77dB(A) sewingoff test in factory is 4000rpm before delivery, which is in the leading level of the peer, the operation is light and quitm and the user is comfortable and healthier.
– The height of the intermettent press foot lift via shortcut hot key can be adjusted : 0-10mm.

Performance Features
The stepping motor controls the stitch length, reverse sewing and presser foot lifting, with stitch length accuracy of up to 0.1mm. The reverse sewing and presser foot lifting are silent.
The use of machine head oil lubrication technology, completely solve the problem of oil pollution, clean sewing area.